Dell POWEREDGE M1000E - Manual (Page 1139)

Configuring Class-of-Service 1139
Configuring Interface Queue Drop Precedence
Beginning in Privileged Exec mode, use the following commands in to
configure characteristics of the drop precedence levels and view related
settings.
exit Exit to Privilege Exec mode.
show interfaces cos-queue Display the class-of-service queue configuration for a
specified interface or all interfaces.
CLI Command Description
configure Enter Global Configuration mode.
interface interface Enter Interface Configuration mode, where
interface is replaced by gigabitethernet
unit/slot/port, tengigabitethernet unit/slot/port, or
port-channel port-channel number.
random-detect queue-parms
queue-id [queue-id...] min-
thresh min1 min2 min3 min4
max-thresh max1 max2 max3
max4 drop-prob prob1 prob2
prob3 prob4
Configure the maximum and minimum thresholds
for one or more queue IDs on a WRED-enabled
interface queue.
You can also use this command in Global
Configuration mode to configure the same
parameters for one or more queues on all interfaces.
exit Exit to Global Config mode.
exit Exit to Privilege Exec mode.
show interfaces random-detect Display WRED parameters for an interface or all
interfaces.
CLI Command Description