Dell POWEREDGE M1000E - Manual (Page 737)

Configuring L2 Multicast Features 737
Copying MLD Snooping Settings to Multiple Ports, LAGs, or VLANs
To copy MLD snooping settings:
1 From the General MLD snooping page, click Show All.
The MLD Snooping Table displays.
2 Select the Copy Parameters From checkbox.
3 Select a Unit/Port, LAG, or VLAN to use as the source of the desired
parameters.
4 Select the Copy To checkbox for the Unit/Ports, LAGs, or VLANs that
these parameters will be copied to.
5 Click Apply.
The MLD Snooping settings are modified, and the device is updated.
MLD Snooping Global Querier Configuration
Use the MLD Snooping Global Querier Configuration page to configure the
parameters for the MLD Snooping Querier.
To display the Global Querier Configuration page, click Switching →
Multicast Support → MLD Snooping → Global Querier Configuration in
the navigation menu.
Figure 25-17. MLD Snooping Global Querier Configuration