Configuring ip routing, Ip routing overview, E "configuring ip routing – Dell POWEREDGE M1000E User Manual
Page 895: E "configuring ip, Ee "configuring ip, In the configuring ip routing
Configuring IP Routing
895
32
Configuring IP Routing
This chapter describes how to configure routing on the switch, including
global routing settings, Address Resolution Protocol (ARP), router discovery,
and static routes.
The topics covered in this chapter include:
• IP Routing Overview
• Default IP Routing Values
• Configuring IP Routing Features (Web)
• Configuring IP Routing Features (CLI)
• IP Routing Configuration Example
IP Routing Overview
The PowerConnect M6220, M6348, M8024, and M8024-k switches are
multilayer switches that support static and dynamic routing. Table 32-1
describes some of the general routing features that you can configure on the
switch.
Table 32-1. IP Routing Features
Feature
Description
ICMP message control
You can configure the type of ICMP messages that
the switch responds to as well as the rate limit and
burst size.
Default gateway
The switch supports a single default gateway. A
manually configured default gateway is more
preferable than a default gateway learned from a
DHCP server.