Dell POWEREDGE M1000E User Manual
Page 285
Advertising
Managing General System Settings
285
For the PCM6220 and PCM6348 switches, the same default configuration is
extended to each switch in the stack. The default configuration does not
include 10G ports as part of any Aggregator Group, although they can be
configured if desired.
Table 11-6. PCM8024 and PCM8024-k Default Port Aggregator Group Mapping
Aggregator
Group
Member Internal Ports
Member Uplink (External)
Ports
Group 1
Te1/0/1, Te1/0/2, Te1/0/3, Te1/0/4, Te1/0/5,
Te1/0/6, Te1/0/7, Te1/0/8, Te1/0/9,
Te1/0/10, Te1/0/11, Te1/0/12, Te1/0/13,
Te1/0/14, Te1/0/15, Te1/0/16
Te1/0/17, Te1/0/18,
Te1/0/19, Te1/0/20
Te1/0/21, Te1/0/22,
Te1/0/23, Te1/0/24
NOTE:
1G and 10G external ports cannot be used at the same time within the
same Aggregator Group.
Advertising