Dell POWEREDGE M1000E - Manual (Page 777)

Configuring Connectivity Fault Management 777
Configuring Dot1ag (Web)
This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring Dot1ag features on a
PowerConnect M6220/M6348/M8024/M8024-k switch. For details about the
fields on a page, click at the top of the page.
Dot1ag Global Configuration
Use the Global Configuration page to enable and disable the Dot1ag admin
mode and to configure the time after which inactive RMEP messages are
removed from the MEP database.
To display the
page, click Switching → Dot1ag → Global Configuration in
the tree view.
Figure 26-4. Dot1ag Global Configuration
Dot1ag MD Configuration
Use the MD Configuration page to configure maintenance domain levels
and names.
To display the
page, click Switching → Dot1ag → MD Configuration in the
tree view.