Dell POWEREDGE M1000E - Manual (Page 889)

Configuring DHCP Server Settings 889
Monitoring DHCP Server Information
Beginning in Privileged EXEC mode, use the following commands to view
bindings, conflicts, and statistics, and to clear the information.
default-router address1
[ address2....address8]
Specify the list of default gateway IP addresses to be
assigned to the DHCP client.
dns-server address1
[ address2....address8]
Specify the list of DNS server IP addresses to be assigned
to the DHCP client.
domain-name domain Specify the domain name for a DHCP client.
option code {ascii string
| hex string1
[ string2...string8] | ip
address1
[ address2...address8]}
Manually configure DHCP options.
CTRL + Z Exit to Privileged EXEC mode.
show ip dhcp pool
configuration { name |
all}
View the settings for the specified address pool or for all
configured address pools.
Command Purpose
show ip dhcp binding
[ address]
View the current binding information in the DHCP server
database. Specify the IP address to view a specific binding.
clear ip dhcp binding
{ address | *}
Delete an automatic address binding from the DHCP
server database. Use * to clear all bindings.
show ip dhcp conflict
[ address]
View the current binding conflicts in the DHCP server
database. Specify the IP address to view a specific conflict.
clear ip dhcp conflict
{ address | *}
Clear an address conflict from the DHCP Server database.
Use * to clear all conflicts.
show ip dhcp server
statistics
View DHCP server statistics.
clear ip dhcp server
statistics
Reset all DHCP server statistics to zero.
Command Purpose