Dell POWEREDGE M1000E User Manual

Page 998

Advertising
background image

998

Configuring OSPF and OSPFv3

area

area-id nssa [no-

redistribution] [default-

information-originate

[metric

metric-value]

[metric-type

metric-type-

value]] [no-summary]

[translator-role

role]

[translator-stab-intv

interval]

Create and configure an NSSA for the specified area ID.

•

metric-value—Specifies the metric of the default route

advertised to the NSSA. (Range: 1–16777214)

•

metric-type-value—The metric type can be one of the

following :
• A metric type of nssa-external 1 (comparable)
• A metric type of nssa-external 2 (non-comparable)

• no-summary—Summary LSAs are not advertised into

the NSSA

• role—The translator role where role is one of the

following :
• always—The router assumes the role of the translator

when it becomes a border router.

• candidate—The router to participate in the translator

election process when it attains border router status.

• interval—The period of time that an elected translator

continues to perform its duties after it determines that

its translator status has been deposed by another router.

(Range: 0–3600)

area

area-id nssa

no-redistribution

Prevent learned external routes from being redistributed

to the NSSA.

exit

Exit to Global Config mode.

exit

Exit to Privileged EXEC mode.

show ipv6 ospf area

area-

id

Show configuration and status of an OSPF area.

Command

Purpose

Advertising