Dell POWEREDGE M1000E - Manual (Page 874)

874 Configuring DHCP Server Settings
Configuring the DHCP Server (Web)
This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring the DHCP server on a
PowerConnect M6220/M6348/M8024/M8024-k switch. For details about the
fields on a page, click at the top of the page.
DHCP Server Network Properties
Use the Network Properties page to define global DHCP server settings and
to configure addresses that are not included in any address pools.
To display the Network Properties page, click Routing → IP → DHCP Server
→ Network Properties in the navigation panel.
Figure 31-2. DHCP Server Network Properties