Dell POWEREDGE M1000E - Manual (Page 997)

Configuring OSPF and OSPFv3 997
Configuring Stub Areas and NSSAs
Beginning in Privileged EXEC mode, use the following commands to
configure OSPFv3 stub areas and NSSAs.
show ipv6 ospf interface
[ interface-type interface-
number]
View summary information for all OSPFv3 interfaces
configured on the switch or for the specified routing
interface.
show ipv6 ospf interface
stats interface-type
interface-number
View per-interface OSPFv3 statistics.
Command Purpose
configure Enter global configuration mode.
ipv6 router ospf Enter OSPFv3 configuration mode.
area area-id stub Create a stub area for the specified area ID.
area area-id stub no-
summary
Prevent Summary LSAs from being advertised into the
stub area.
area area-id default-cost
cost
Configure the metric value (default cost) for the type 3
summary LSA sent into the stub area. Range:
1–16777215)
Command Purpose