Dell POWEREDGE M1000E - Manual (Page 754)

754 Configuring L2 Multicast Features
mac address-table
multicast forbidden
address vlan vlan-id
{ mac-multicast-address
| ip-multicast-address}
{add | remove}
interface interface-list
Forbid adding a specific Multicast address to specific ports.
• mac-multicast-address — MAC multicast address in the
format xxxx.xxxx.xxxx.
• ip- multicast-address — IP multicast address.
• add — Adds ports to the group. If no option is specified,
this is the default option.
• remove — Removes ports from the group.
• interface-list — Specifies the interface type (port-
channel, gigabitethernet, tengigabitethernet) and
number. Separate nonconsecutive interfaces with a
comma and no spaces; use a hyphen to designate a range
of ports.
mac address-table
multicast forbidden
forward-unregistered
vlan vlan-id
Prevent the switch from forwarding traffic with
unregistered multicast addresses on the specified VLAN.
This command sets the forwarding mode to Filter
Unregistered.
mac address-table
multicast forward-all
vlan vlan-id
Allow the switch to forward all multicast packets on the
specified VLAN.
mac address-table
multicast forward-
unregistered vlan vlan-id
Allow the switch to forward packets with unregistered
multicast addresses on the specified VLAN.
NOTE: Do not use the mac address-table multicast
forbidden forward-unregistered command with the mac
address-table multicast forward-unregistered command on
the same interface.
exit Exit to Privileged EXEC mode.
show mac address-table
multicast [vlan vlan-id]
[address mac-multicast-
address | ip-multicast-
address] [format ip |
mac]]
View entries in the multicast MAC address table.
show mac address-table
filtering vlan-id
View the multicast filtering configuration information for
the specified VLAN.
Command Purpose