Dell POWEREDGE M1000E User Manual
Page 624
Advertising
624
Configuring VLANs
a.
From the Switching → VLAN → LAG Settings page, make sure Po1
is selected.
b.
Configure the following settings:
• Port VLAN Mode — General
• PVID — 400
• Frame Type — AdmitAll
c.
Click Apply.
Figure 21-28. LAG Settings
6 Configure port 1 as a trunk port.
a
From the Switching → VLAN → Port Settings page, make sure port
Gi1/0/1 is selected.
b
From the Port VLAN Mode field, select Trunk.
c
Click Apply.
Advertising