Automatically updating the image and configuration, Auto configuration overview, What is the dhcp auto configuration process – Dell POWEREDGE M1000E User Manual
Page 387: Automatically updating the, Image and configuration, What is the dhcp auto configuration, Process, Automatically updating the image
Auto Image and Configuration Update
387
14
Automatically Updating the Image
and Configuration
The topics covered in this chapter include:
• Auto Configuration Overview
• What Are the Dependencies for DHCP Auto Configuration?
• Default Auto Configuration Values
• Managing Auto Configuration (Web)
• Managing Auto Configuration (CLI)
• Auto Configuration Example
Auto Configuration Overview
The Auto Configuration feature can automatically update the firmware
image and obtain configuration information when the switch boots. Auto
Configuration begins the automatic download and installation process when
the switch is initialized and no configuration file (startup-config) is found, or
when the switch boots and loads a saved configuration that has Auto
Configuration enabled. Auto Configuration is enabled by default.
What Is the DHCP Auto Configuration Process?
The switch can use a DHCP server to obtain configuration information from
a TFTP server.
DHCP Auto Configuration is accomplished in three phases:
1 Assignment or configuration of an IP address for the switch
2 Assignment of a TFTP server
3 Obtaining a configuration file for the switch from the TFTP server
NOTE:
Auto Install is not invoked if a valid configuration file is on the switch.