FaxBack NET SatisFAXtion 8.6 - Manual - Manual (Page 202)

4 – Appendices NET SatisFAXtion 8.6 Manual 202
retry on, this setting can make that error retryable. Format: Up to 10 comma-
separated hexadecimal numbers.
bft_header_actions
board_data_log
busy_call_send_retry_seconds [dword 0–65535]: The amount of time in
seconds to elapse before attempting to resend a message when the call
resulted in a remote busy. Default:
60 .
bypass_file_base [boolean]: Bypasses the FILEBASE queue driver. Disables
FILEBASE even if
filebase_on=true . Default: true .
completed_remain_active_seconds
conver t_receive_input_buf fer_size [dword]: Size of input buffer used by
image converter during receive fax. Default:
8192 .
conver t_receive_output_buffer_size [dword]: Size of output buffer used
by image converter during receive fax. Default:
8192 .
conver t_send_input_buffer_size [dword]: Size of input buffer used by
image converter during send fax. Default:
8192 .
conver t_send_output_buffer_size [dword]: Size of output buffer used by
image converter during send fax. Default:
8192 .
debug_receive_image_types [string]: This causes all raw received data for
each page be written to a file in the queues subdirectory so as to allow for later
debugging caused by convert problems related to the image data. The format of
the file name is
ICF-<hex message handle>.DEBUG_IMAGE.<page num>_<image
type>_<resolution> . The way this works is that all raw data is written to the
debug file and at the end of each page, then that file is re-read and its data is
streamed through convert. If convert causes a UAE or fails to convert the data,
the debug file remains for later debugging.
It should be noted that whenever a message and its attachments is deleted,
that this file also gets deleted. Also, see the
keep_debug_image_always setting.
Format: Comma-separated list of one or more of the following values:
1D
2D
T6
JPEG
COLOR
200H_400V
300H_300V
400H_400V
debug_send_image_types [string]: This causes all raw received data for
each page be written to a file in the queues subdirectory so as to allow for later
debugging caused by convert problems related to the image data. The format of
the file name is
ICF-<hex message handle>.DEBUG_IMAGE.<page num>_<image
type>_<resolution> . The way this works is that all raw data is written to the
debug file and at the end of each page, then that file is re-read and its data is
streamed through convert. If convert causes a UAE or fails to convert the data,
the debug file remains for later debugging.
It should be noted that whenever a message and its attachments is deleted,
that this file also gets deleted. Also, see the
keep_debug_image_always setting.
Format: Comma-separated list of one or more of the following values: