1 class2 device – FaxBack NET SatisFAXtion 8.6 - Manual User Manual

Page 220

Advertising
background image

4 – Appendices

NET SatisFAXtion 8.6 Manual

220

allowed_receive_transfer_types [string]: These settings control the type of
fax and file transfers that the driver can perform for a device. Format: Comma
separated list of the following. Default:

FAX,ECM,V34

.

FAX
ECM

V34

allowed_send_image_types [string]: These settings control the image types
that the device can send and receive via the T.30 protocol over the telephone
network. To receive or send some image types, the corresponding

allowed_receive

/

send_transfer_type

setting must include ECM. Format:

Comma separated list of the following. Default:

1D,2D,T6,JBIG

.

1D
2D

T6
JPEG

JBIG
COLOR

200H_400V
300H_300V

400H_400V

allowed_send_transfer_types [string]: These settings control the type of fax
and file transfers that the driver can perform for a device. Format: Comma
separated list of the following. Default:

FAX,ECM,V34

.

FAX
ECM

V34

dial_prefix [string(20)]: Data to be prepended to dial strings, typically 9, if
present.

4.2.1.3.1

Class2 Device

allowed_receive_baud_rates [string]: This setting constrains a modem to
use only certain baud rates. Use this to block a modem from using a rate or
rates that it supports, but are unreliable in your environment or are undesirable
for some other reason. On transmitting, use this as a mask; the modem will use
only those rates you list. On receiving, set the fastest and slowest rates; the
modem will allow those and any in between. Format: Comma separated list of

14400

,

12000

,

9600

,

7200

,

4800

and

2400

. Default:

14400,12000,9600,7200,4800,2400

.

allowed_send_baud_rates [string]: This setting constrains a modem to use
only certain baud rates. Use this to block a modem from using a rate or rates
that it supports, but are unreliable in your environment or are undesirable for
some other reason. On transmitting, use this as a mask; the modem will use
only those rates you list. On receiving, set the fastest and slowest rates; the
modem will allow those and any in between. Format: Comma separated list of

14400

,

12000

,

9600

,

7200

,

4800

and

2400

. Default:

14400,12000,9600,7200,4800,2400

.

carrier_wait [dword 0–255]: Seconds the driver to wait in the “dialing” or
“answering” states for a carrier from the remote device before hanging up.
Default:

45

.

Advertising