FaxBack NET SatisFAXtion 8.6 - Manual - Manual (Page 60)

2 – Server Administration NET SatisFAXtion 8.6 Manual 60
2.5.4.5.1.2 Publish Export Workflows
From a command prompt, cd to C:\Program Files\NET SatisFAXtion . Run the
following three commands:
1. WorkflowDesigner.exe /install PublishedWorkflows\Export_Core\Export_handles.xml /nowizard
2. WorkflowDesigner.exe /install PublishedWorkflows\Export_Core\ /nowizard
3. WorkflowDesigner.exe /install PublishedWorkflows\Export_File\ /nowizard
Click OK to any prompts.
Run the Workflow Service Monitor, and right-click on each of the Export
workflows. Select Autorun.
2.5.4.5.1.3 Configure Export
From the Start menu, use “Configure Export” to configure Export as needed.
2.5.5
Autoprint
The Autoprint module allows inbound and outbound faxes to be automatically
printed to any configured printer. Autoprint can be configured globally, to print all
faxes sent or received, or configured for individual groups so that only certain
faxes are printed.
Only printers configured for the service account are available and displayed.
Autoprint works off a duplicate copy of a fax (sent to the user AUTOPRINT) so
that it doesn’t interfere with other fax routing that the server is doing.
2.5.5.1 Global Autoprint
To configure global Autoprint, run the Administration program and log in. Click
File ► Autoprint Setup. The first two tabs allow selection of the printer to use for
letter and legal page size faxes. On the Legal tab is a checkbox to use 8½''×14''
paper, which is often required for most printers to choose the legal-sized paper
tray.
The Settings tab configures whether Autoprint prints inbound faxes, outbound
faxes or both. Autoprint can also print just the first page of the fax rather than all
pages.
Illustration 2.5.5.1#1: Letter and Legal Printer Selection