FaxBack NET SatisFAXtion 8.6 - Manual - Manual (Page 228)

4 – Appendices NET SatisFAXtion 8.6 Manual 228
4.2.1.8
Archive
Legacy Export module.
Activated [boolean]: Determines if legacy export module is loaded and
functioning.
4.2.1.9 ASCIIPacketServer
AllowMissingFiles [boolean]: This parameter allows you to configure your
system to deliver a fax if ANY of the files requested exist. By default, ALL the
requested documents must exist in order for a packet to be processed and a fax
submitted.
If AllowMissingFiles is set to 1, the Connector will still send a message even if
some of the files listed in the packet are missing. If AllowMissingFiles is 0 or
not present, the usual behavior prevails.
If AllowMissingFiles is 1 and all the files listed in the packet are missing,
ASC2CAS will put the following error in the finished packet:
[Logging]
FaxStatusNum = 2
FaxStatus=Nothing to send
AppendPageCountToFileName [boolean]: If 1 , this setting enables a custom
naming convention ( <filename>-<number_of_pages>.<extension> ) applied to the
image file received when in SINGLE_CALL_RECV mode. This is a custom, limited
implementation, where it’s possible for a prior instance of a file results in the
file not being deleted, e.g., when the number of pages in an image change.
Client [string]: Undocumented.
CompletionDir [string]: Path to the “finished” directory. If this is blank,
completed packets are discarded.
DbgOn [boolean]: Undocumented.
DbgFile [string]: Undocumented.
Domain [string]: Fax server’s domain.
DontDeletePackets [boolean]: Disabled.
FaxSer ver [string]: Fax server’s name.
PacketPath [string]: Path to the “orders” directory. This directory will be
scanned periodically for
*.T* and *.S* files.
PortThresholdMultiplier [dword 1–255]: Read in and process a number of
files equal to this times the number of ports. Default:
3 .
Protocol [dword]: Communication protocol.
RegisteredName [string]: User name to log into the fax server. Default:
ClarityNS .
RegisteredPassword [string]: Password to log into the fax server.
ScanRate [dword 0–65535]: Milliseconds to wait between scans of the
PacketPath directory. Default: 5000 .
SingleCallPacketPath [string]: Undocumented.
SingleCallScanRate [dword 0–65535]: Undocumented.