FaxBack NET SatisFAXtion 8.6 - Manual User Manual

Page 213

Advertising

4 – Appendices

NET SatisFAXtion 8.6 Manual

213

debug_show_file_path [string(256)]: Partial path or complete path and file
name of where to create debug file. If the

debug_show_output

is set for

CONSOLE

and the

debug_show_file_path

is specified in the registry, then you can get both

CONSOLE

and

FILE

debug output simultaneously. This is a device specific setting,

but you can set the default for all devices by specifying this under the global
icanfax section.

debug_show_output [string]: Debug output that displays various run time
behavior of ICANFax. When specifying the

FAX_DEVICE

, the ICANFax debug

output will be mixed in with the fax drivers debug output. This is a device
specific setting, but you can set the default for all devices by specifying this
under the global section. Format: One of the following values. Default:

NONE

NONE
CONSOLE

FILE
FAX_DEVICE

SERIAL_CAPTURE
TCP

csid [string(20)]: The CSI for receive and the TSI for send.

allowed_receive_image_types [string]: These settings control the image
types that the device can send and receive via the T.30 protocol over the
telephone network. To receive or send some image types, the corresponding

allowed_receive

send_transfer_type

setting must include ECM. Format:

Comma separated list of the following. Default:

1D,2D,T6,JBIG

2D
T6

JPEG
JBIG

COLOR
200H_400V

300H_300V
400H_400V

allowed_receive_transfer_types [string]: These settings control the type of
fax and file transfers that the driver can perform for a device. Format: Comma
separated list of the following. Default:

FAX,ECM,V34

FAX

ECM
V34

allowed_send_image_types [string]: These settings control the image types
that the device can send and receive via the T.30 protocol over the telephone
network. To receive or send some image types, the corresponding