FaxBack NET SatisFAXtion 8.6 - Manual - Manual (Page 27)

2 – Server Administration NET SatisFAXtion 8.6 Manual 27
2.3.3.1
Starting and Stopping NET SatisFAXtion
Manually starting and stopping the NET SatisFAXtion service is rarely needed
because all configuration utilities will restart the service if needed.
The easiest way to start and stop NET SatisFAXtion is via the LoaderConsole
icons in the notification area. Right click on the icon, and choose Start to start
the service, or choose Stop to stop the service.
You can also start or stop the service from the Start menu, under Programs ►
NET SatisFAXtion ► Fax Service (Start & Stop).
Finally you can start or stop the service from the Services control panel, though
this method is not as user-friendly as the others. In particular you will not
receive any feedback to know when NET SatisFAXtion has finished loading all
modules and is ready to send and receive faxes.
2.3.3.2 Running NET SatisFAXtion as an Application
Running NET SatisFAXtion as an application can be a useful diagnostic
technique. It helps diagnose the following problems:
To troubleshoot cover sheet and document conversion problems
To troubleshoot Autoprint failures.
To troubleshoot crash errors.
To troubleshoot rights/permissions related issues or failures.
Before making a change to the service, write down the account the service is
currently running as, so that it can be put back to the same account later. See
2.3.2) Service Account Permissions .
First, stop any running Email Gateway (SMTP Email Gateway or POP3 Email
Gateway). Run the Change Server Settings utility, Start ► Programs ► NET
SatisFAXtion ►
Change Server Settings. Uncheck the box “Run fax server
as an automatic start service”. Click OK.
Illustration 2.3.3.2#1: Change Server Settings, General Tab