KEYENCE CB-EP100 User Manual

Page 104

Advertising
background image

- EtherNet/IP Network Unit CB-EP100 User’s Manual (LJ-V7000 Edition) -

3-4 Message Communication

3-80

3

Communi

cat

in

g wit

h the

L

J

-V700

0 Ser

ies

• Responses (when failed)

For details on the attribute ID, settings, general status, and additional status of each
parameter, refer to

"CB Object (Class ID:6BH)" (Page 3-40) and

"Attributes"

(Page 3-44).

(6) Requesting to reflect setting write area

Message communication reflects the contents of the setting write area of the
measuring instrument connected to the CB-EP100 up to the specified hierarchy level.
Service code 4EH is used.
The following settings are required to use this object.

• Service code

• Class ID

• Instance ID

• Service Data

• Commands

• Response (when successful)

• Response (when failed)

Item

Description

Data Example

General status

A general status for the service is returned

08H

Additional status

An additional status is returned.

-

Service response data

There is no service response data.

-

Item

Description

Data Example

Service code

Specify "request to reflect setting write area (4EH)"
(fixed value).

4EH

Class ID

CB Object (6BH) is specified (fixed value).

6BH

Instance ID

01H becomes a fixed value.

01H

Attribute ID

There is no attribute ID.

-

Service data

Specify the reflection destination area (0 = setting area
currently in operation, 1 = save area)

00000000H or

00000001H

Item

Description

Data Example

General status

Message communication returns status (00H) to notify
normal termination.

00H

Service response data

There is no service response data.

-

Item

Description

Data Example

General status

Message communication returns a general status.

05H

Additional status

Returns the additional status.

-

Service response data

There is no service response data.

-

Advertising