KEYENCE CB-EP100 - Manual (Page 60)

- EtherNet/IP Network Unit CB-EP100 User’s Manual (LJ-V7000 Edition) -
3-4 Message Communication
3-36
3
Communi
cat
in
g wit
h the
L
J
-V700
0 Ser
ies
The following describes the objects for use with the CB-EP100.
Objects for use with the CB-EP100
Command
Response
CB
Object
Message
Router
Object
Connection
Manager
Object
Assembly
Object
Identity
Object
TCP/IP
Interface
Object
Ethernet
Link
Object
EtherNet/IP unit
Object Name Class ID Description
Reference
Page
CB Object 6BH
This object provides the statuses of the CB-EP100
and the Measuring instrument connected to the CB-
EP100 and writes and reads parameters. This object
is unique to the CB-EP100.
3-40
Identity Object 01H
This object provides identification information,
general information and a reset service, etc.
5-10
Message Router
Object
02H
This object provides connection points for message
communication.
5-13
Assembly Object 04H
This object provides access to the devices via cyclic
communication. This object can be used to send data
to the devices that do not support cyclic
communication.
5-14
Connection
Manager Object
06H
This object is used for connection-type
communication.
5-16
TCP/IP Interface
Object
F5H
This object provides the structure for setting the TCP/
IP network interface. You can set an IP address,
subnet mask and gateway, etc., in this object.
5-18
Ethernet Link Object F6H This object provides Ethernet status information. 5-22