KEYENCE CB-EP100 - Manual (Page 105)

3-4 Message Communication
3-81
3
Communi
cat
in
g wit
h the
L
J
-V700
0 Ser
ies
- EtherNet/IP Network Unit CB-EP100 User’s Manual (LJ-V7000 Edition) -
(7) Updating setting write area
Message communication updates the contents of the setting write area of the
measuring instrument connected to the CB-EP100 with the contents of the specified
hierarchy level. Service code 4FH is used.
The following settings are required to use this object.
• Service code
• Class ID
• Instance ID
• Service Data
• Commands
• Response (when successful)
• Response (when failed)
Item Description Data Example
Service code Specify "update setting write area (4FH)" (fixed value). 4FH
Class ID CB Object (6BH) is specified (fixed value). 6BH
Instance ID 01H becomes a fixed value. 01H
Attribute ID There is no data. -
Service data
Update source area (0 = setting area currently in
operation, 1 = save area)
00000000H or
00000001H
Item Description Data Example
General status
Message communication returns status (00H) to notify
normal termination.
00H
Service response data There is no service response data. -
Item Description Data Example
General status Message communication returns a general status. 05H
Additional status Returns the additional status. -
Service response data There is no service response data. -