KEYENCE CB-EP100 - Manual (Page 23)

2-4 Configuring Communication with the CB-EP100
2-9
2
Con
nect
io
n a
nd
Conf
ig
urat
io
n
- EtherNet/IP Network Unit CB-EP100 User’s Manual (LJ-V7000 Edition) -
3
The IP address has now been set.
What is BOOTP?
BOOTP is the abbreviation of BOOT strap Protocol. This protocol is used
by the client device in the TCP/IP network to make the network settings
assigned from the server.
If there is a BOOTP server in the same network as the device running as
the BOOTP client, an IP address is assigned to the device connected as
the BOOTP client.
Reference
IP address assignment
BOOTP client
BOOTP server
Via Ethernet
Ethernet