Configuration procedures, Configuration procedures -2 – KEYENCE CB-EP100 User Manual
Page 16
2-2
2
Con
nect
io
n a
nd
Conf
ig
urat
io
n
- EtherNet/IP Network Unit CB-EP100 User’s Manual (LJ-V7000 Edition) -
2-1
Procedures from Installation before Using the CB-EP100 to Configuration
This section describes the procedures before you use the CB-EP100.
The above configurations enable communication.
For the outline of scanner side configuration for communication with a Rockwell
Automation scanner, refer to
"Configuration Procedure for Control/Compact Logix
Configuration Procedures
1. Installation and Connection to measuring instrument
Connecting the CB-EP100 to measuring instrument (Page 2-3)
2. Wiring
3. Configuring Communication with the CB-EP100
4. Configuring Communication with the Scanner
Connecting a communication cable (Page 2-5)
Setting the IP address (Page 2-7)
Setting the IP address (Page 2-10)
Registering the device profile of the CB-EP100 (Page 2-10)
Configuring the Scanner Side
(Refer to each scanner manual.)