KEYENCE CB-EP100 User Manual
Page 68
- EtherNet/IP Network Unit CB-EP100 User’s Manual (LJ-V7000 Edition) -
3-4 Message Communication
3-44
3
Communi
cat
in
g wit
h the
L
J
-V700
0 Ser
ies
Attributes
The attribute ID data below indicates something for each instance ID.
"Attribute" type - read or write - is indicated by R and W.
For details on data type, refer to page 3-39.
Instance ID = 0
Data stored and managed on the CB-EP100 can be obtained and changed.
Service
code
(hexadecimal)
Attribute
ID
(hexadecimal)
Name
Description and service data
Attribute
Data type
0EH
64H
-
C6H
Monitor data
The array for each parameter and
attribute ID is the same as the array
from 300H to 35DH in the following
table (Instance ID=1).
R
UINT
or
WORD or
DINT
C7H
-
34F
Reserved
W
10H
R
0EH
350H
Port No.
Specifies TCP/UDP port number, 2-
byte TCP port number, 2-byte UDP
port number (reserved).
R/W
struct of
UINT[2]
351H
-
CFFH
Reserved
4CH
None
Error clear