KEYENCE CB-EP100 User Manual
Page 18
Advertising
- EtherNet/IP Network Unit CB-EP100 User’s Manual (LJ-V7000 Edition) -
2-2 Installation and Connection to measuring instrument
2-4
2
Con
nect
io
n a
nd
Conf
ig
urat
io
n
Mounting the controller to a DIN rail
This section explains the procedure for
mounting the controller to a DIN rail.
1
Pull the tab on the back panel
of the controller and the CB-
EP100, and then attach the
controller and the CB-EP100 to
the DIN rail.
2
Push in the tab to fix the
controller and the CB-EP100 in
place.
Mounting using the bottom panel
This section explains the procedure for
mounting the controller using the
bottom panel.
1
Fasten the screws into the
mounting holes on the bottom
panel.
For information on mounting
dimension, refer to
Tab
Six M4 screws (screw depth 6 mm)
Advertising