KEYENCE CB-EP100 - Manual (Page 134)

5-5 Objects for use with the CB-EP100
5-18
TCP/IP Interface Object
5
Ap
pe
ndi
x
- EtherNet/IP Network Unit CB-EP100 User’s Manual (LJ-V7000 Edition) -
This object provides the structure for setting the TCP/ IP network interface. The IP
address, subnet mask and gateway, etc, can be set.
„ Class
z Class service
Get_Attribute_Single (0EH) and Get_Attributes_All (01H) are supported.
z Class attribute (instance ID: 00H)
„ Instance
z Instance service
Get_Attribute_Single (0EH), Set_Attribute_Single (10H), and Get_Attributes_All
(01H) are supported.
Changes to the writable Attribute ID are applied when the power is turned on
again or when the reset service is executed.
z Instance attribute (instance ID: 01H)
TCP/IP Interface Object (Class ID: F5H)
Attribute ID Name Description Attribute
Data
Type
Parameter
Range
01H Revision Object revision R UINT 0002H
02H Max Instance
Maximum instance
number
R UINT 0001H
03H
Number of
Instances Number of instances in
generated object
R UINT 0001H
Attribute ID Name Description Attribute
Data
Type
Parameter
Range
01H Status Interface status R DWORD Reference 1
02H
Configuration
Capability Method for acquiring
initial IP address
R DWORD Reference 2
03H
Configuration
Control
Method in which the device
acquires initialization at
start-up
R/W DWORD Reference 3
04H
Physical
Link Object Path to physical link
object
R
Structure -
Path size Path size (bytes) UINT 0004H
Path
Segment for identifying
physical link object Padded
EPATH
20F62401H