Comtech EF Data turboIP-G2 - Manual (Page 103)

turboIP-G2 Performance Enhancement Proxy Revision 2
Management via the CLI or Web Server GUI CD-TURBOIP-G2
5–29
5.2.3.8 Command Line Interface Screen
5.2.3.8.1 Interface Overview
The Command Line Interface screen allows the user to run any commands currently in the
standard CLI. This debug CLI allows for full configuration changes using the correct syntaxes.
Interface Command/Query Execution: As invoked from the CLI Main Menu, the Command
Line Interface screen provides a user command/query prompt only (>> _ ).
Typical command syntax using this interface is, at the prompt, to enter the command or query,
any options, and <cr> (i.e., ENTER) to execute:
ب command <option><cr>
Getting help: From this command prompt, type ‘help’ or ‘?’ to display the command choices
available via this interface:
For a list of a command or query’s available options, as per the message provided at the bottom
of the ‘help’ screen, type the name only and then <cr>.
For example, typing
بlog<cr> results in the following response:
>> log
Usage:
log clear - clears the Event Log
log print - prints out the Event Log
Exit Interface / Return to CLI Main Menu: To exit out of the Command Line Interface screen
and return to the CLI Main Menu (as shown in Sect. 5.2.2.), type ‘menu’.