Comtech EF Data turboIP-G2 - Manual (Page 109)

turboIP-G2 Performance Enhancement Proxy Revision 2
Management via the CLI or Web Server GUI CD-TURBOIP-G2
5–35
‘set’ Command Option Description
linkSetting
Sets the link settings for LAN, WAN and MGT Ethernet ports.
Usage:
ب set linkSetting <LAN|WAN|MANAGEMENT> <link setting>
Valid link settings:
auto
10baseT
10baseT-FD
100baseTx
100baseTx-FD
1000baseTx-FD
logging
Sets the state of the Event Log.
Usage:
ب set logging <on|enabled|disabled|off>
mtu <LAN or WAN>
Sets the MTU.
Usage:
ب set mtu <LAN|WAN> <number between 576 and 1500 bytes>
pbr
Sets the PBR state.
Usage:
ب set pbr <on|enabled|disabled|off>
pbrAddress <LAN or WAN>
Sets the pbr address.
Usage to set LAN or WAN IP Address for PBR:
ب set pbrAddress <LAN or WAN> <ip address in dot notation>
pbrMask <LAN or WAN>
Sets the pbr subnet mask.
Usage to set LAN or WAN Subnet Mask for PBR:
ب set pbrMask <LAN or WAN> <ip address in dot notation>
pbrNextHop <LAN or WAN>
Sets the pbr next hop address.
Usage to set LAN or WAN Next Hop for PBR:
ب set pbrNextHop <LAN or WAN> <ip address in dot notation>
rateLimit <LAN or WAN>
Sets the transmission rate for the LAN or WAN.
Usage:
ب set rateLimit LAN <number from 10 to 1000000 kbps>
ب set rateLimit WAN <number from 10 to 155000 kbps>
sshInterface
Sets the ssh interface current state.
Usage:
ب set sshInterface <on|enabled|disabled|off>
time
Sets the system time. NOTE: Time setting is in Coordinated Universal Time (UTC).
Usage:
ب set time <MM/DD/YYYY HH:MM:SS>
webCache
Sets the web cache state.
Usage:
ب set webCache <on|enabled|disabled|off>
ب set webCache clear