Comtech EF Data turboIP-G2 - Manual (Page 13)

turboIP-G2 Performance Enhancement Proxy Revision 2
Preface CD-TURBOIP-G2
xi
• Use Type 'D' connectors that have back-shells with continuous metallic shielding.
• Type ‘D’ cabling must have a continuous outer shield (either foil or braid, or both). The
shield must be bonded to the back-shell.
• Operate the unit with its cover on at all times.
Electromagnetic Compatibility (EMC) Compliance
EN 55022 – 1997 Compliance
This equipment meets the radio disturbance characteristic specifications for information
technology equipment as defined in EN 55022 Limits and Methods of Measurement of Radio
Interference Characteristics of Information Technology Equipment.
EN 50082-1 – 1997 Compliance
This equipment meets the electromagnetic compatibility/generic immunity standard as defined in
EN 50082-1 Immunity Standards for Commercial Electronic Products.
Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15, Subpart B of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in
accordance with the Installation and Operation Manual, operation of this equipment in a residential
area is likely to cause harmful interference that requires the user to take adequate protection
measures; in which case, users are required to correct the interference at their own expense.