Comtech EF Data turboIP-G2 - Manual (Page 12)

turboIP-G2 Performance Enhancement Proxy Revision 2
Preface CD-TURBOIP-G2
x
Metric Conversion
Metric conversion information is located on the inside back cover of this manual. This information
is provided to assist the operator in cross-referencing non-Metric to Metric conversions.
Recommended Standard Designations
Recommended Standard (RS) Designations have been superseded by the new designation of the
Electronic Industries Association (EIA). There may be reference to the old ‘RS’ designation (e.g.,
RS-232) when depicting actual text displayed on the turboIP-G2’s Web Server or CLI (Remote
Control) M&C interfaces. All other references use the EIA designation.
Trademarks
Product names mentioned in this manual may be trademarks or registered trademarks of their
respective companies and are hereby acknowledged.
Safety Compliance
EN 60950 Electrical Safety and Compliance
This equipment has been shown to comply with the EN 60950 Safety of Information Technology
Equipment (Including Electrical Business Machines) safety standard.
European Low Voltage Directive (LVD) (2006/95/EC)
Symbol Description
<HAR> Type of power cord required for use in the European Community.
!
CAUTION: Double-pole/Neutral Fusing
ACHTUNG: Zweipolige bzw. Neutralleiter-Sicherung
International Symbols
Symbol Definition Symbol Definition
Alternating Current Protective Earth
Fuse Chassis Ground
TO MAKE SURE THAT THE UNIT COMPLIES WITH THESE STANDARDS, OBEY
THESE INSTRUCTIONS:
For additional symbols, refer to Cautions and Warnings listed earlier in this
Preface. Applicable testing is routinely performed as a condition of manufacturing
on all units to ensure compliance with safety requirements of EN 60950.