Verilink C100 (880-502893-001) Product Manual - Manual (Page 128)

C100 and C150 SNMP MIB
D-14 Verilink C100 and C150 T1/FT1 CSU/DSUs 6/15/99
Private Enterprise - Verilink Proprietary CSU-1-MIB
The Verilink CSU-1-MIB is a proprietary MIB used on the C100 and
C150 product. It encompasses the configuration, diagnostic, and
statistic information for a single T1/FT1 CSU/DSU. Although the
C100 and C150 must also support MIB-II manageable elements, this
MIB specifies the singular data elements that apply only to T1/FT1
CSUs. References to dsx1 in RFC1406 apply to the T1 Network
Interface. References to dsx1 in the Verilink proprietary MIB apply to
the T1 Customer Interface (typically a PBX).
The object ID prefix for this proprietary MIB is defined as follows:
1.3.6.1.4.1.2270.w.x.y.z
where:
1 (iso)
3 (org)
6 (dod)
1 (internet)
4 (private)
1 (enterprises)
2270 (Verilink vendor #)
w (Verilink product code)
There are six possible Verilink product codes:
(1) C100
(2) C150
(3) TL3580
(4) TL3080
(5) TL3452
(6) TL3450
x (specific group in CSU-1 MIB)
There are three possible groups in the CSU-1 MIB:
sysConfig (x = 1)
chnConfig (x = 2)
dsx1Config (x = 3)
y (specific variable in group)
z (state of specific variable in group)