Verilink C100 (880-502893-001) Product Manual User Manual
Page 26
Advertising
Configuration Using the DIP Switches
3-2
Verilink C100 and C150 T1/FT1 CSU/DSU
6/15/99
After setting the DIP switches, power-on/off the unit to get it to read the new
switch settings. Once the unit is configured and operating, powering-on/off
resets the performance and diagnostic registers.
A detailed description of the programming options as well as the
factory default settings follows.
IMPORTANT
!
Advertising
This manual is related to the following products: