TA Triumph-Adler DC 2023 - Manual (Page 13)

10
NAMES OF PARTS
‹ Auto Selection/Filing key (Indicator)
(Press to operate auto selection/filing copying. The
indicator will light. The optional DF must be installed to use
these functions. See page 43 and 65.)
› Duplex key (Indicator)
Press for duplex copying. The indicator will light. The
optional duplex unit must be installed to use this function.
See page 20.)
fi Page Separation key (Indicator)
(Press to divide 2-page or 2-sided originals into separate
images. The indicator is lit in the page separation mode.
See page 21.)
fl Image key (Indicator)
(Press for image copying, such as form overlay or XY
zoom. The indicator is lit in either mode. See page 18, 39
and 41.)
‡ Page # key (Indicator)
(Press to print page numbers. The indicator will light. See
page 42.)
° Margin/Border Erase key (Indicator)
(Press to create margins or erase borders in copies. The
indicator will light. See page 22 and 25.)
· Hand-out/Sheet/Insert key (Indicator)
(Press to use the transparency + backing or sheet mode.
The indicator is lit in any of these modes. See page 26, 27
and 29.)
‚ */Language key
(Press to set copy management, default settings and
language selection.)
ΠProgram key
(Press to copy according to programmed settings. See
page 45.)
„ Staple key (Indicator)
(Press to staple copies finished with the optional finisher.
The indicator is lit while the staple mode is ON.
See page 66.)
´ Sort key/Sort indicator/Group indicator
(Press to sort copies into separate sets, or for sorting or
grouping copies with optional finisher. The indicator will
light in either mode.)
● Initial mode (at the end of warm-up or when the Clear All
key is pressed)
In the initial mode, paper of the same size as the original is
selected automatically ("auto paper selection mode"), the
number of copies set to "1", "manual exposure mode" is set
for the copy exposure mode and copy quality is set to "Text &
Photo".
* It is also possible to change the copy exposure mode from
"manual exposure mode" to "auto exposure mode" in the
initial mode. (See "
1 EXPOSURE MODE" on page 58.)
● Auto clear function
About 90 seconds after copying stops, the copier will
automatically return to the same settings as those after warm
up. (However, the exposure mode will not change.) Copying
can be performed at the same settings (copy mode, number
of copies and exposure mode) if copying is started before the
auto clear function kicks in.
● Automatic drawer switching function
If two drawers contain the same size of paper and the paper
in one drawer runs out during copying, this function switches
paper feed from the empty drawer to the full drawer.
* The automatic drawer switching function can be disabled.
(See " 1 AUTO DRAWER SWITCH" on page 63.)