TA Triumph-Adler DC 2023 - Manual (Page 69)

66
OPTIONAL EQUIPMENT
1 The names of parts
1. Left 3 cover
2. Deck
2 How to load the paper
1. Pull the deck out toward you as far as it will go.
2. Load the paper in two rows.
* A sticker indicates how high paper can be loaded. Do not exceed the limit on
the sticker.
* When loading paper into the deck, make sure the copy side is facing upward.
(The copy side is the side facing upward when the package is opened.)
3. Gently push the deck back in.
* Before leaving the copier in disuse for a prolonged period of time, remove the
paper from the drawers, and seal in its original packaging to protect it against
moisture.
(4) Finisher
The finisher stores a large quantity of copies. It also sorts multiple copies into sets
by shifting the eject position. Paginated copies can be stapled, too.
For details, see the finisher's instruction handbook.
● Selecting the sort mode
Select the sort mode by pressing the Sort key. When neither the Sort nor the Group
indicator is lit, the copier is in the non-sort mode. Copied paper will be ejected onto
the main tray of the finisher being shifted by one set.
* The non-sort mode must be set when copies are made onto transparencies or
other special paper.
● Selecting the staple mode
Press the Staple key to light the indicator.