TA Triumph-Adler DC 2023 - Manual (Page 19)

16
BASIC OPERATION
3. Setting originals
Set originals on the platen or in the DF (document feeder).
When setting the original on the platen, adjust it with the original size
scales based on the left rear position.
* See the instruction handbook provided with the DF for instructions
on how to set originals in the DF.
33
4. Function selection (page 17 to 48)
Select from the copier's various functions.
44
To have the copy exposure adjusted automatically, press the Auto
Exp. key and set the auto exposure mode. The Auto Exp. indicator
will light. In the auto exposure mode, the brightness of the original is
detected and the most suitable exposure selected. It is also possible
to make clean copies without the original background or colour.
* When the overall copies are too dark/light, exposure will be
adjusted. (See " 3 A.E." on page 58.)
* The default setting of the copy exposure adjustment can be set to
auto exposure. (See " 1 EXPOSURE MODE" on page 58.)
66
--22
10. At the end of copying
Finished copies are ejected onto the copy store section.
* Up to 250 sheets can be stored.
1100
CAUTION
If the copier will not be used for a short period of time
(overnight, etc.), turn the main switch OFF (O). If it will not
be used for an extended period of time (vacations, etc.),
remove the power plug from the outlet for safety purposes
during the time the copier is not in use.
77
7. Copy quality selection
Copy quality is selected according to the original. Press the copy
quality selection key to light the following indicators. However, for
originals with just text, neither of the indicators needs to be lit.
Photo mode: Photo indicator
Text & Photo mode: Text & Photo indicator
* The default copy quality mode used in the initial mode can be
selected. (See " 7 ORIG. QUALITY" on page 59.)
* The copy exposure can be adjusted in all copy quality modes.
(See " 4 MIX ORI.DENSITY", " 5 TXT ORI.DENSITY" and " 6 PHO
ORI.DENSITY" on page 58 and 59.)