TA Triumph-Adler DC 2023 - Manual (Page 54)

8. Enter the maximum number of copies with the numeric keys. Limits are set in
units of 1000's, up to a maximum of 999,000.
* Entering "0" enables unlimited copying.
* If the Stop/Clear key is pressed, the registered ID-code is cleared and a new
ID-code can be entered.
9. Press the enter key. The display will return to the screen in step 4.
* To register another ID-code, repeat steps 5 to 9.
10. Press the cursor up key to select "END", and press the enter key.
The message display will return to the screen in step 2.
11. Press the cursor up key to select "END", and press the enter key.
The message display will return to the "READY TO COPY." screen.
● Deleting ID-codes
1. Display the copy management selection screen. (See page 49.)
2. Press the cursor down key to select "COPY MGMT SETTING".
3. Press the enter key.
4. Press the cursor down key to select "CODE DELETE".
5. Press the enter key.
6. Press the cursor down or up key to select the ID-code to be deleted.
7. Press the enter key.
8. A message asking you to confirm the deletion will appear. To delete the code,
press the cursor up key to select "YES" and press the enter key. To cancel the
command, make sure that "NO" has been selected and press the enter key. The
message display will return to the screen in step 6.
* To delete another Dept. code, repeat steps 6 to 8.
51
COPIER MANAGEMENT