TA Triumph-Adler DC 2023 - Manual (Page 46)

6. Press the enter key.
7. Press the Start key. Scanning of the originals will start. When setting the original
in the DF, copying will be performed. When setting the original on the platen, go
to the next step.
8. Replace the original and press the "#" key in the numeric keys. Scanning of the
originals will start. Carry out the same procedures to the originals of which
copying will be performed, and finally, press the Start key. Copying will start.
(17) Unifying the different size originals into one size [Filing mode]
Different size originals can be separated to the same-size group and scanned, and
copied onto the same paper size.
* The optional DF must be installed to use this function.
* This mode can be combined with duplex copying if the optional duplex unit is
used.
* The original can be set either in the DF and on the platen.
1. Press the Auto Selection/Filing key to light the indicator.
The function selection screen will appear.
2. Press the cursor down to select "FILING".
3. Press the enter key.
43
FUNCTIONS