TA Triumph-Adler DC 2023 - Manual (Page 85)

82
SPECIFICATIONS
Type................................................Desk-top
Original table .................................Fixed type
Copying system ............................Indirect electrostatic
Originals.........................................Sheets of paper, books and A3)
Copy sizes .....................................A3, B4 (257 mm x 364 mm), A4 (horizontal), A4 (vertical), A5 (vertical) and Folio
Print margin loss: 0.5-5.5 mm
Copying speed ..............................Same-size copying/memory copying; A3: 17 copies/min.,
B4 (257 mm x 364 mm): 19 copies/min., A4 (horizontal): 31 copies/min.,
A4 (vertical): 23 copies/min.
Warm-up time ................................Within 45 secs.(at room temperature of 20˚C, humidity 65%RH),
From energy saver mode: Within 30 secs. (at room temperature of 20˚C, humidity 65%RH)
First copy speed............................From 5 to 6 secs. (A4 (horizontal))
Zoom ratio......................................Any ratio between 25 and 400% (in increments of 1%). Alternatively, standard ratios.
Image storage memory.................16 MB (One general purpose SIMM <16 MB or 32 MB> can be added.)
Resolution......................................Reading: 600 x 600 dpi
Writing: 600 x 600 dpi
Paper feed system ........................Automatic feeding from drawers (2 drawers, capacity 550 sheets each [80g/m 2 / standard
paper specified by our company]), automatic feeding from multi-bypass (capacity 200 sheets
each [80g/m
2 ]
Copy paper ....................................Drawer: Standard paper (64-80g/m 2 )
Multi-bypass: Standard paper (60-160g/m 2 )
Special paper (letterheads, coloured paper and transparencies),
envelop [only when using the printer function] (COM-10, Monarch, DL and C5)
Continuous copying .....................1-999 sheets
Light source...................................Rare gas lamp
Developing system .......................Dry process
Fixing system ................................Heat roller
Cleaning system............................Blade
Photoconductor ............................OPC
Functions and modes ...................Self-diagnosis function, energy save mode, auto exposure adjustment function, original size
detection function, auto paper size selection function, auto magnification selection mode,
zoom copy mode, size zoom mode, XY zoom mode, photo mode, margin mode, print page
numbers function, page separation copy mode, border erase mode, form overlay, layout copy,
sort mode, invert copy, mirror image mode, program mode, copy management function,
language selection function
Power source.................................220-240V AC 50 or 60HZ, 5.5A
Power consumption......................Rated power consumption 1320W Max.
Dimensions....................................585 mm (W)x 600 mm(D) x 745 mm(H)
Weight ............................................Approx. 81 kg
Noise Emission .............................<70 dB(A)
Required space .............................735 mm (W)x 600 mm(D)
Optional equipment ......................DF (Document feeder), paper feed unit (drawer-type/large-capacity deck-type), finisher,
duplex unit, job separator, mail box, key counter, fax board, printer board, network board
(Specifications are subject to change without notice.)