TA Triumph-Adler DC 2023 - Manual (Page 16)

2. Press the cursor down or up key to select the "OHP FILM" mode.
3. Press the enter key. The message display will return to the "READY TO COPY."
screen.
* When OHP film mode has been set, paper will be fed via the multi-bypass.
1. Open the multi-bypass.
13
PREPARATIONS
2. Adjust the insert guides to the size of the paper to be loaded.
3. Insert the paper all the way in, along the guides, as far as it will go.
* When loading paper into the multi-bypass, make sure the copy side is facing
upward. (The copy side is the side facing upward when the package is opened.)
* A4 (horizontal) and smaller size paper can be copied without opening the multi-
bypass.
● When copying onto the transparency
When copying onto the transparency, set the transparency mode with the following
procedure.
1. Press the Hand-out/Sheet/Insert key and light the indicator.
The function selection screen will appear.