TA Triumph-Adler DC 2023 - Manual (Page 51)

* To resume copying after the energy saver (preheat) function has been activated,
press the Energy Saver key again. It takes about 30 seconds for the copier to
recover from the energy saver (preheat) function.
* The auto energy saver function can be set to trigger after no copying has been
done for a certain period of time. (See " 5 PREHEAT TIME" on page 63.)
(23) Auto shut-off function
This function automatically turns the main switch OFF (O) if no copying operation is
performed for a certain period (15 to 240 minutes). To make copies again, set the
main switch to the ON ( l ) position.
● Auto shut-off function
The auto shut-off function is a power saving feature which automatically turns OFF
(O) the main switch when a certain time elapses without copying being performed.
Copiers are generally in the standby mode more than operation mode, and power
consumption in the standby mode occupies a large part of overall consumption.
Having the copier turn OFF (O) automatically reduces unnecessary power
consumption in the standby mode or at night when the copier is left on. The result
is a lower electricity bill.
* To change the time remaining until the auto shut off function kicks in, see the
" 6 SHUT OFF TIME" on page 64. To cancel the auto shut-off function, see the
" 2 AUTO SHUT-OFF" on page 63.
48
FUNCTIONS