TA Triumph-Adler DC 2023 - Manual (Page 15)

12
PREPARATIONS
5. Set the paper flush against the left-hand wall of the drawer, and position the
paper so that it is aligned with the correct size scale (marked on the bottom of
the drawer).
* A sticker indicates how high paper can be loaded. Do not exceed this limits.
* When loading paper into the drawer, make sure the copy side is facing upward.
(The copy side is the side facing upward when the package is opened.)
6. Gently push the drawer back in.
* Before leaving the copier in disuse for a prolonged period of time, remove the
paper from the drawer(s) and seal in its original packaging to protect it against
moisture.
2 Loading paper into the multi-bypass
Up to 200 sheets of standard paper (80g/m 2 ) can be set at a time. Paper sizes that
can be used are A3 to A6 (vertical), and Folio. When copying onto special paper,
be sure to use the multi-bypass.
* The types of special paper and the number of sheets which can be loaded in this
tray are:
• Letterheads: 200 sheets
• Coloured paper: 200 sheets
• Transparencies: 25 sheets (Fan transparencies before setting.)
• Standard paper (160g/m
2 ): 100 sheets