TA Triumph-Adler DC 2023 - Manual (Page 60)

9. Make settings as explained here following.
* (>) displayed in each setting screen indicates the present setting value.
* After finishing each setting, the display will return to the screen in step 7.
If changing other settings, repeat step 7 to 9.
● How to set the copy default setting mode
1. Press the */Language key.
The management mode selection screen will appear.
2. Press the cursor down key to select "DEFAULT".
3. Press the enter key.
4 Enter the management code "3100" with the numeric keys.
* The 4-digit management code can be changed. (See " 8 MANAGEMENT
CODE ENTRY" on page 64.)
5. Press the cursor down key to select "COPY DEFAULT".
6. Press the enter key.
The copy default settings will appear.
7. Press the cursor down or up key to select the copy default setting to be changed.
See " ● Copy default settings" on page 56 for settings that can be changed.
8. Press the enter key.
57
COPIER MANAGEMENT