TA Triumph-Adler DC 2023 - Manual (Page 23)

(3) Duplex copying from various originals [Duplex copy]
Duplex copies can be made from two-page originals or one-sided originals with the
optional duplex unit.
● Duplex copying from two-sided originals
A two-sided original is copied onto both the front and back side of the paper.
The copy looks just like the original.
* The paper sizes that can be used are A3 to A5R.
● Duplex copying from a book original
Facing pages of a magazine or book are copied on both sides of the paper by a
single press of the Start key.
The binding direction of the originals can also be selected.
1 "LEFT SIDE": Two-page originals are copied from the left side.
2 "RIGHT SIDE": Two-page originals are copied from the right side.
* The paper size used in this mode is limited to A4.
● Duplex copying from one-sided originals
The one-sided original is copied on both sides (back and front) of the paper.
When an odd number of originals are copied, the back side of the last page is
blank.
* The back side copy can also be rotated 180 degrees.
1 Normal: The back side comes out in the same direction as the original.
2 Rotate: The back side is rotated 180 degree with respect to the original.
When bound at the top, the copies are oriented in the same direction.
1. Set the original(s).
2. Press the Duplex key to light the indicator.
The duplex copy setting screen will appear.
3. Press the cursor down key to select the duplex copy mode.
4. Press the enter key.
If "1-SIDED ORIG.> DUPLEX" was selected, go to the next step.
If "DUPLEX ORIG.> DUPLEX" was selected, the message display will be
changed to the "DUPLEX MODE." screen.
If "BOOK ORIGINAL" was selected, go to step 7.
20
FUNCTIONS