TA Triumph-Adler DC 2023 - Manual (Page 43)

1. Press the Image key to light the indicator.
The function selection screen will appear.
2. Press the cursor down key to select "OVERLAY", and press the enter key.
The form overlay setting screen will appear.
3. Press the cursor down or up key to select the copy exposure of the overlay
original. The exposure level can be selected from 10 steps between 10% and
100%.
4. Press the enter key.
5. Make sure that "ENTER" has been selected and press the enter key.
6. Set the original(s).
* If originals are set in the DF, set the image overlay original as the first sheet.
* If originals are set on the platen, set the image overlay original first.
7. Press the Start key.
* If originals are set in the DF, all originals are scanned one by one and copying
performed accordingly.
* If an original is set on the platen, go to the next step.
40
FUNCTIONS