92 qos pcp, 93 qos policer – PLANET MGSW-28240F User Manual
Page 129
Command Guide of MGSW-28240F
Switch (config-if) # qos map tag-cos pcp 4 dei 0 cos 5 dpl 1
4.2.56.92 qos pcp
Command:
qos pcp <Pcp : 0-7>
qos Quality of Service
pcp Priority Code Point configuration
<Pcp : 0-7> Specific Priority Code Point
Default:
0
Usage Guide:
To configure PCP of QoS for specific interface
Example:
To configure PCP (6) of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos pcp 6
4.2.56.93 qos policer
Command:
qos policer <Rate : 100-13200000>
qos Quality of Service
policer Policer configuration
<Rate : 100-13200000> Policer rate (default kbps)
Default:
0
Usage Guide:
To configure Ingress Port Policers Rate of QoS for specific interface
Example:
To configure Ingress Port Policers Rate (9999 Kbps) of QoS for GigabitEthernet X/X
-129-