PLANET MGSW-28240F - Manual (Page 175)

Command Guide of MGSW-28240F
Default:
N/A
Usage Guide:
To configure VLAN mode of ARP inspection.
Example:
To configure VLAN mode (VLAN 1, Log type: Permit) of ARP inspection.
Switch# configure terminal
Switch (config)# ip arp inspection vlan 1 logging permit
4.2.63 ip dhcp excluded-address
Command:
ip dhcp excluded-address <A.B.C.D>
ip Internet Protocol
dhcp Dynamic Host Configuration Protocol
excluded-address Prevent DHCP from assigning certain addresses
<A.B.C.D> Low IP address
Default:
N/A
Usage Guide:
To configure excluded IP range of DHCP Server.
Example:
To configure excluded IP range (192.168.0.100~192.168.0.101) of DHCP Server.
Switch# configure terminal
Switch (config)# ip dhcp excluded-address 192.168.0.100 192.168.0.101
4.2.64 ip dhcp pool
Command:
-175-