PLANET MGSW-28240F - Manual (Page 244)

Command Guide of MGSW-28240F
4.2.133 mep <Instance> performance-monitoring
Command:
mep <Instance> performance-monitoring
mep Maintenance Entity Point
<Instance> The MEP instance number.
performance-monitoring Performance monitoring Data Set collection (MEF35)
Default:
Disabled
Usage Guide:
To enable Performance Monitoring of MEP.
Example:
To enable Performance Monitoring of MEP 1
Switch# configure terminal
Switch (config)# mep 1 performance-monitoring
4.2.134 mep <Instance> tst
Command:
mep <Instance> tst <prio> [ dei ] mep-id <mepid> [ sequence ] [ all-zero | all-one |
one-zero ] rate <rate> size <size>
mep Maintenance Entity Point
<Instance> The MEP instance number.
tst Test Signal
<Prio : 0-7> Priority in case of tagged OAM. In the EVC domain this is the COS-ID.
dei Drop Eligible Indicator in case of tagged OAM.
mep-id Peer MEP-ID for unicast TST. The MAC is taken from peer MEP MAC database.
<Mepid : uint> Peer MEP-ID value
sequence Enable sequence number in TST PDU
all-one Test pattern is set to all one.
all-zero Test pattern is set to all zero.
-244-