PLANET MGSW-28240F - Manual (Page 340)

Command Guide of MGSW-28240F
Switch access-list rate limiter ID 16 is 1 pps
GigabitEthernet 1/1 :
---------------------
GigabitEthernet 1/1 access-list action is permit
GigabitEthernet 1/1 access-list policy ID is 0
GigabitEthernet 1/1 access-list rate limiter ID is disabled
GigabitEthernet 1/1 access-list redirect is disabled
GigabitEthernet 1/1 access-list logging is disabled
GigabitEthernet 1/1 access-list shutdown is disabled
GigabitEthernet 1/1 access-list port-state is enabled
GigabitEthernet 1/1 access-list counter is 0
4.21.4 show access-list
Command:
show access-list [ interface [ ( <port_type> [ <v_port_type_list> ] ) ] ] [ rate-limiter
[ <rate_limiter_list> ] ] [ ace statistics [ <ace_list> ] ]
show Show running system information
access-list Access list
ace Access list entry
statistics Traffic statistics
interface Select an interface to configure
rate-limiter Rate limiter
Default:
N/A
Usage Guide:
To display the ACL Statistics, Rate Limiter List, ACE Statistics.
Example:
To display the ACL Statistics, Rate Limiter List, ACE Statistics for interface GigabitEthernet 1/1.
Switch # show access-list interface GigabitEthernet 1/1 ace statistics rate-limiter
Switch access-list ace number: 0
-340-