PLANET MGSW-28240F - Manual (Page 396)

Command Guide of MGSW-28240F
4.21.72 show ntp status
Command:
show ntp status
show Show running system information
ntp Configure NTP
status status
Default:
N/A
Usage Guide:
To display the NTP Server information.
Example:
To display the NTP Server information.
Switch # show ntp status
NTP Mode : enabled
Idx Server IP host address (a.b.c.d) or a host name string
--- ------------------------------------------------------
1 192.168.0.44
2
3
4
5
4.21.73 show platform phy
Command:
show platform phy [ interface ( <port_type> [ <port_type_list> ] ) ]
show Show running system information
platform Platform specific information
phy PHYs' information
-396-