PLANET MGSW-28240F - Manual (Page 157)

Command Guide of MGSW-28240F
Usage Guide:
To configure IP address mode for specific VLAN
Example:
To configure IP address mode (192.168.1.10/24) for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip address 192.168.1.10 255.255.255.0
4.2.57.5 ip address dhcp
Command:
ip address dhcp
ip Interface Internet Protocol config commands
address Address configuraton
dhcp Enable DHCP
Default:
None
Usage Guide:
To configure IP address mode for specific VLAN
Example:
To configure IP address mode (DHCP) for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip address dhcp
4.2.57.6 ip address dhcp fallback
Command:
ip address dhcp fallback <ipv4_addr> <ipv4_netmask>
-157-